High Output Professional
Laser System

The SDL-80 is a proven commodity in the industry of laser
cosmetology.
Maximum power output is
220 joules per cm2/second (20-30 joules per pulse) 80,000mW
QCW, 800-810nm.
The SDL80 has a very efficient 20mm wide beam with a pulse
duration of 70ms. Pulse frequency is user adjustable up to 7
emissions per second.
Removes unwanted hair, veins,
tattoos, wrinkles, scars and more.
Rebuilds skin tone & texture for a radiant youthful
appearance.
Approved
For:
Permanent Hair Reduction,
Varicose Vein Reduction, Skin Toning, Body Sculpting, Photo
Rejuvenation, Hyper Pigment - Age Spot Removal, Wrinkle
Reduction, Tattoo Removal, Scar - Stretch Mark Reduction,
Psoriasis, Rosacea, Sun Damage, Blemish (mole, wart, skin
tag) Removal, Nail Fungus Treatment and More. These
treatment options are covered in literature sent with the
system.
Powerful,
Versatile, and Affordable Laser Technology
The SDL80 Universal Kit Comes With:
Professional Diode Laser Hand
Piece 220jcm2 energy density
(fluence), key lockout safety
switch, laser 'enabled' system
status
LED, adjustable intensity, 2
pair of laser protection
eyewear,
50ml carbon dye gel, 100ml of
3% lidocaine pre-treatment
gel, 50ml of post treatment
gel, tweezers, and instructions.
The
Standard Output Diode Laser
System has a very comfortable
and versatile hand piece. A
powerful 5cfm positive
displacement micro-fan keeps
the semiconductor cool during
usage, which increases the
power, performance, and overall
life-expectancy of the laser.
Available in the Standard
Universal Kit
for $1299.95
Accessory Treatment Kit
Also
Available in these SDL80 Equipment &
Specialized Kits
If you are
using cosmetics on the area to be treated containing
retinoids (retin
a, tretinoin, altinac, avita, trans retinoic acid, vitamin A
acid, tazorac, adapalene, differin),
or AHA (alpha
hydroxyl acids, glycolic acid) stop using the cosmetic
at least two days before the laser treatment. If you have
been taking Accutane (isotretinoin) you should be off
of it for two to six months before laser treatment. If you
have had a microdermabrasion on the area to be treated it is
best to wait seven to ten days before laser treatment.
-
Energy Density (fluence): 220 jcm2/sec.
maximum (20-30 jcm2/pulse)
-
Pulse Frequency: User
adjustable
from 1, 3, 7 pulses/second
-
Pulse
Duration: Factory
Preset 70ms
-
Beam
Size and Shape: 20 mm
line optics
-
Treatment Time for Dense
Moustache Removal: 3 minutes
-
Treatment Time for Dense
Chest and Abdomen: 10-20 minutes
-
PDF Instructions:
Link
-
Video Instructions:
Download
-
Topical Acc. Data
Sheets:
1,
2,
3
-
Certificate of
Conformity: FCC, CDRH, CE low voltage directive.
608819803180
-
Controller Size:
6" H x 8" W x12" L (13cm x 18cm x 25cm).
Weight: 7lbs (3kg).
90 Day
Unconditional Money-Back
Guarantee
Warranty Information:
To the original
purchaser, the above
item will arrive
without damage or
defect in material
or workmanship.
Should your system
arrive damaged or in
otherwise
incomplete/unacceptable
condition please
refer to the
warranty repair card
in your instruction
packet to expedite
the return. This
warranty is valid
for 12 calendar
months from the date
of purchase.
Additional years may
be purchased for
$9.95 each up to 5
years. Refer to the
warranty
registration card
included with your
packet
for more
information.
Guaranteed
Utility Compatibility.
110-240 Volts.
All kits are sent
with corresponding
input voltage, hertz
and plug style for
the country of
destination.
If you have special
requirements, please
note them in the
checkout section of
your purchase.
Legal Disclaimer:
Images on this page
are for example
purposes only and do
not necessarily
reflect results that
will be achieved on
all clients and
persons. Typical
results from laser
applications are
rated in terms of
'improvement' and
not 'cure'. This
equipment is not
intended to
diagnose, treat or
cure any disease.
|